Does anyone know the code for a Dish network remote to be compatible with a Toshiba TV?I need the instructions
Question:
Answer:
The code search button is used to setup the remote. You can either setup the remote using the code for your brand of product, from the code tables (on a seperate sheet) which are as follows
517
419
512
613
719
112
506
111
618
627
437
041
891
802
111
313
715
or you can search through the library of codes until you find a code that works for you product.
If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps.
1, Manually turn on the device(TV, VCR, etc.) to be controlled.
2. Press and hold the code search button until the red indicator stays on, then release the code search button.
3. Press and quickly release the desired mode button (TV, VCR, ect.). The red indicator blinks off once.
4. Press the Channel up button repeatedly(up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press channel down button to backtrack through the library until device changes channel. Pressing Channel up changes direction forward again.
5. Press and release Mute to install code.
Most users will store VCR codes under the VCR button, Cable codes under Cable, etc. If (for example) you want to store a VCR code entry under CABLe, first follow the procedure for direct code entry and press CABLE in step 2 of direct code entry, then enter any VCR code in step 3 of direct code entry. Then follow the steps above for Code Search Ior brand search below, Note: if the device does not have a Channel up or Down button, use Play(VCR only) or Power instead. Code search starts from the currently stored 3 digit number under that mode.
516,590,596,617,618,631one of thoes should work
point your remote at the television, hold the tv button down until all of the lights light up(on top) punch in one of the three digit codes listed below, then press the pound key. check the volume after each one to check. if one doesnt work, repeat the process for the next one.
codes for Toshiba:
516,590,617,631,635,667,678,68...
if these codes dont work, then the remote can't be programmed.
You could always try them twice, in case you made a mistake the first time.
Its 617, programmed it a hundred times. Press and hold the TV button until the others light up, then let go, TV should be flashing, press 617, then the # sign, bottom right, TV will blink 3 times then try power and volume.
More Questions & Answers...