Anyone running comp cams Dual Energy 275?
Question:
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 2,000-6,000
Intake Duration at 050 inch Lift: 219
Exhaust Duration at 050 inch Lift: 229
Duration at 050 inch Lift: 219 int./229 exh.
Advertised Intake Duration: 275
Advertised Exhaust Duration: 277
Advertised Duration: 275 int./277 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.462 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.482 in.
Valve Lift with Factory Rocker Arm Ratio: 0.462 int./0.482 exh. lift
Lobe Separation (degrees): 110
Grind Number: CS 275DEH-10
Lifter Style: Hydraulic flat tappet
Answer:
you didn't say what kind of car or engine its going in, but it looks like a pretty mild cam, and should work fine in a daily driver.in that engine it should work pretty good, you'll be able to hear it a bit and it should make good vacuum, i would recommend topping it off with a small duel plane intake like a edelbrock performer with a 600 to 650cfm carb and a set of small tube headers 1 1/2 primarys that should give you a nice street combination that you can drive everyday and have fun with
More Questions & Answers...